Gadget Girl

Clean Your Disk Drive of Unnecessary Files and Your Computer’s Performance Will Improve
When it comes to maintaining your computer, you’ve probably heard it all before. “Run Defrag!” “Scan Your Disk for Errors!” Although these two activities are important, there’s more you can do to extend the life of your computer beyond today’s predicted two-year span. In fact, by following the simple advice below, you can enjoy the use of your computer to up to five years or more - reserving expenses to simple software upgrades rather then complete and costly hardware upgrades.

One of the easiest and least expensive things you can do to extend the life of your computer is to get rid of unnecessary programs, folders, and files. A disk drive that’s clogged with unnecessary and unused files is disk drive that works harder than it has to. Although Window’s defrag system can ease some of the stress that these files place onto the drive, it doesn’t do much to get rid of the problem in the first place.

Read the rest of this entry »

Have you ever thought about networking your computers at home? If you have a small collection of computers around the house (and a small collection of computer users), you can connect each one of those computers to one another and share data, software, and hardware including a single Internet connection. There are many creative uses for home networking, however it’s an ideal situation when upgrading each computer to the same capability is financially out of the question. On a home network, each computer has access to the equipment of the better machine in the group as if that equipment were their own.

Connecting computers with either an Ethernet cable or a Wireless connection can create a home network. The easiest and cheapest method uses an Ethernet connection, which requires a series of network cards, a cable for each computer, and a router. The network card is similar to the old modems we used in the past to connect to the Internet, however in a home network, it’s used to communicate with every computer that’s connected to it.

Read the rest of this entry »

If you’re familiar with MS-DOS at all, you’ll recall that it’s a command-driven operating system that performs functions issued at the C:> prompt. The only way to get an MS-DOS computer to do something was to type a command at this prompt and if you can imagine, it was a rather cumbersome way to use a computer.

As an example, to load up Microsoft’s simple editing program, you had to type the name of the drive that the program was on, the directory that the program was in, and then the name of the program. So if Microsoft Edit was in a directory or folder named “Process,” you could start the program by typing, “C:>process\edit.com” Then, and only then would the program load up for use.

Read the rest of this entry »

Yesterday, we spent about three hours trying to convince a client of ours that brand new computers just don’t come equipped with the all things that most computers need in a PC. We tried to convince him that a fully functional computer is one that is personalized with specially selected hardware and software accessories - and that the computer purchased at the store doesn’t come with these things. Unfortunately, all of our convincing was to our avail. Our client insisted that he should never need more than what came with his boxed product and that we were just trying “bilk” more money out of him.

As computer consultants, it’s our job and mission to make sure our clients are 100% satisfied when they walk out our offices. But our job is unnecessarily made harder when people don’t take the time to learn about computer accessories and familiarize themselves with the limitations of store-bought computers. Hopefully by the time you finish reading this article, you’ll understand the lesson that we were trying to teach our client: “What comes out of the box is really just a starter kit.”

Read the rest of this entry »

These days it’s strange to hear people say, “I’m just not computer literate,” as computers have evolved from archaic scientific calculators to simple point-and-click type machines. We suspect that today’s “computer illiterates” are people who haven’t taken the time to experiment with such a machine. And we strongly believe that spending just twenty minutes with one could turn the most adamant technological caveman into any one of those who have fun wreaking chatroom havoc on the Internet today.

Today, one only needs to learn how to manipulate a mouse, punch a few buttons on a keyboard, or really just turn the thing on to use a computer. It’s hard for some folks to believe, but the computers of this generation almost run themselves! For fun, let’s investigate just how little knowledge these thousand-dollar machines actually require.

Read the rest of this entry »

Every new computer that’s brought home from the store has an operating system installed onto it. But what most new computer users don’t realize, is that without an operating system, that computer would be a simple shell of possibilities. A powered computer lacking an operating system wouldn’t display anything more than a bunch of confusing text messages that describe the computer’s boot process. At the very end of this process, the computer looks for an operating system and if not found, it will prompt the user to tell it where it is.

Earlier computers didn’t have an operating system and if you have experience with the computers of the early eighties, you’ll remember that most to them didn’t even have a hard drive! These old computers booted an MS-DOS type operating system from drivers stored onto a floppy disk, and in order to use a program, users would remove the boot floppy and then insert a new floppy that contained the program.

Read the rest of this entry »

Downloading files from the Internet has always been one of the most popular activities on the Internet - third to sending email and browsing the web. We download files from software libraries, ftp directories, YouTube and Google Video, MP3 sites, and we download files sent to us as email attachments.

Being so popular an activity, it’s imperative that you compress the files destined for another computer. File compression combines a number of different files into one file, and it can also significantly reduce a very large file to a smaller one. As a result, the transmission of a compressed file across the Internet is faster and smoother. This article looks at compressed files a little closer and it describes how to compress and decompress them using two of the most popular archiving programs.

Read the rest of this entry »

In a previous article, we introduced automating some tasks with MS-DOS batch files. In this article, we’re going to introduce programming and describe how it can be used to control the way your computer works. Normally, computer novices aren’t interested in controlling the computer. New computer users are typically interested in learning more about how the thing works. However they may be surprised to learn that programming increases computer knowledge as a whole and it can help to diminish the fear associated with using a new computer.

Programming a computer is creating a sequence of instructions that enable the computer to do something.1 The people who program computers (called programmers) use a programming language to communicate with a computer. You might have heard of some of these languages in the past such as Visual Basic, C++, or Fortran.

Read the rest of this entry »

Well there’s no denying it - No matter how new or how well maintained our computers are, we all encounter computer problems sooner or later. The good news is that we don’t have to face them alone. There are a ton of resources available to walk us through computer issues but it may take a little knowledge in knowing how to access them. This article will show you how.

1. Remember help files. It’s funny, but people seem to forget that every computer and every program installed on a computer comes with its own help file. Even the operating system of a computer has a help file and it really should be the first place to look for answers. Help files are designed not only to guide the usage of a computer, they’re also designed to solve problems. Inside a help file, look for a section called, “Troubleshooting” (or something similar) when you need to resolve an issue. This section is reserved for solving problems specific to the software or hardware that you’re using.

Read the rest of this entry »

Computer errors can pop up when least expected, they can cause the entire system to suddenly shut down, and they can inadvertently corrupt data to the point where it can’t be deciphered. Although they can’t always be avoided, it’s important to remember that computer errors can be corrected. The key is to understand what computer errors are, understand what they mean when they show up, and understand how to minimize their occurrence in the first place.

Basically, computer errors are the result of a number of things that may or may not have anything to do with the way the computer is used. They “operate” whenever there’s a conflict among commands. Remember that computers essentially run off of a series of commands and it’s usually a smooth process. But when one command conflicts with another command - or when one command asks for a process or information that isn’t available, the computer returns results that aren’t useable. That’s an error.

Read the rest of this entry »